Assembly
Assemble the Sprinkler Arms to the brass impeller “Tee” on top of the sprinkler. Make sure the word “Top” is facing up on both arms. Using the hex wrench supplied, gently tighten the arm nuts until snug. Do not over tighten, as you will need to rotate the arms for your desired spray pattern. (Figure 1)
Slide the hose clamp onto the end of the hose. Push the hose all the way onto the sprinkler’s water inlet. Slide the hose clamp forward towards the sprinkler with the clamp screw facing up. Using a screwdriver, tighten the hose clamp screw. Insert the black hose washer into the female coupling end. (Figure 2)
